Tautron RW152 Rewinde

The Tautron RW152 label rewinder is used in conjunction with any make of label printer. Easy to set up and even easier to use. The label rewinder makes it easy to get the job done. With automatic tension control, the rewinder will wind up your labels while you work on more important tasks.

To use the label rewinder, Place it in front of your label printer. Connect the power supply. print approximately 700mm of labels. Place a 40mm core on the shaft and lock it in place with the U bar that has been supplied with the rewinder. Tape the labels onto the core. Switch on the rewinder and allow it to take up the slack. You are now ready to let the rewinder do the work rewinding your labels while you continue with more important tasks. 

Argox R-48 Rewinder

The Argox R-48 label rewinder has been designed specifically for use with
any make of label printer. If you are tired of winding labels by hand, Then the R-48 is for you. Winding labels with a width of 120mm wide, and at a speed of up to 8 inches or 20CM per second, The R-48 can wind up to 230mm in diameter. 

With interchangeable core adapters. The rewinder can wind onto either 25mm, 40mm or 76mm cores. The choice is yours. Set up the rewinder, Start the printer, and allow the rewinder to do the rewinding work. You are then free to get on with more important tasks.

Godex T20 Label Rewinder

The Godex T20 rewinder has an idler arm that can be positioned to rewind labels from either side of the printer. Depending on the user’s requirements, the Godex T20 can rewind “inside or outside” label rolls.

Features:

• Supports maximum 7″ label roll rewinding.
• Can be used with all GoDEX’s printers.
• Supports inside and outside label rewinding.
• Support three Core Size: 1” (25.2 mm – 25.6 mm), 1.5” (40 mm – 40.6 mm) and 3″ (76 mm – 76.6 mm); Core and coreless kits included.

Label Applicator For Bottles

Label Applicator for bottles or cylindrical objects, Get the label placed 100% accurately time after time.

This easy to use hand driven label applicator is possibly the best priced option on the market today

Godex T10 Rewinder

The Godex T10 Label Rewinder has an idler arm that can be positioned to rewind labels from either side of the printer.

Features:

• Can be used with most printers.
• Supports inside and outside label rewinding.
• Support three Core Size: 1” (25.2 mm – 25.6 mm), 1.5” (40 mm – 40.6 mm) and 3″ (76 mm – 76.6 mm); Core and coreless kits included.